Andreas Köster

Projects

Activity

Reported issues: 112

06/11/2019

03:09 PM OPC Server for W-IE-NE-R Devices Support #552 (Closed): Accessing SNMP item 'outputTripTimeMaxCurrent' for a Wiener MPOD device (p...

01/17/2018

03:45 PM OPC Server for W-IE-NE-R Devices Feature #611 (Closed): Request for change: MPOD channel id format to be fixed at 3 digits ('0' pa...
Info from Ben Farnham: is working fine

12/15/2017

05:55 PM OPC Server for W-IE-NE-R Devices Feature #611 (Resolved): Request for change: MPOD channel id format to be fixed at 3 digits ('0' ...
Implemented in r4171.
It was a bit more difficult than expected (the namespace generation function is generic, not i...

12/08/2017

04:28 PM OPC Server for W-IE-NE-R Devices Feature #611: Request for change: MPOD channel id format to be fixed at 3 digits ('0' padded). Ch...
Hi Ben, just a simple thing to clarify before I start the modification:
The first channel of the first board is now ...

12/04/2017

11:21 AM OPC Server for W-IE-NE-R Devices Bug #586: Wiener MPOD and OPC-DA server: inserting an ISEG HV module appears to corrupt the OPC-D...
I tried here some tests, without reproducing the disconnect.
Maybe it is related to the MPODC firmware I detected du...
09:17 AM OPC Server for W-IE-NE-R Devices Support #552: Accessing SNMP item 'outputTripTimeMaxCurrent' for a Wiener MPOD device (plus other...
There had been some documentation and intaller modifications necessary.
A new wienerOPCS vers. WienerOPCSInstall-4.0...

12/01/2017

09:17 AM OPC Server for W-IE-NE-R Devices Support #588 (Closed): Request for information: What is the numbering scheme for MPOD modules and...
09:14 AM OPC Server for W-IE-NE-R Devices Support #552: Accessing SNMP item 'outputTripTimeMaxCurrent' for a Wiener MPOD device (plus other...
Implemented in r4153.
Remark: MPOD: During the test it was recognized that write to the "Output.Supervisionbehavior"...

09/22/2017

04:16 PM OPC Server for W-IE-NE-R Devices Support #588: Request for information: What is the numbering scheme for MPOD modules and channels...
Hi Ben,
correct. SNMP definition is u0 ... u999, and the number is (slot number [0..9] * 100) + channel number[0..99...
04:01 PM OPC Server for W-IE-NE-R Devices Bug #22 (Closed): MUSE 2.0.572.0 / "Terminal Voltage too HIGH" and "Temperature too HIGH"
Hi Ben,
agreed, it's just a small textual thing and causes no problem if you know how to interpret the message.
I c...

Also available in: Atom